Avantgarde
Products
Boots Washing Machine BW/3
- Made in Italy: the machine is entirely built in Italy, with semi-finished products produced in the area and commercial components from prestigious Italian and European manufacturers.
- CE mark and use and maintenance manual.
- The structure of the machine is completely made of AISI 304 stainless steel – 2B finish.
- The machine is equipped with three special brushes with nylon bristles for completely cleaning the boot. One, positioned in the lower part, washes and cleans the sole, while the other two, positioned in the upper part of the machine, wash and clean the boot shaft.
- A dosing pump, activated by the same button that turns the brushes, conveys the detergent or disinfectant (depending on environmental needs) in an adequate quantity onto the upper brushes. The flow rate of the pump is adjustable using a screwdriver.
- The machine is supplied complete with a silicone tube for suction of the detergent product. The user must insert the tube (complete with filter at the end) into the containers of the product to be dispensed, and refill once the product is finished.
- A solenoid valve, activated by the same button that turns the brushes, makes the washing water flow onto the brushes uniformly via a “blade” nozzle. The connection of the machine to the water supply must be carried out by the user
- A “maintained action” button is used to activate the brushes, the dosing pump and the solenoid valve for the inlet of the washing water. When the button is released, the brush, pump and water supply stop
- Width: 54 cm
- Deepth: 60 cm
- High: 98cm
- Weight: 60kg
- Motor power: 0,37 kw
- Water outlet diameter: 1” ½ (48 mm)
Related
